Profitec Pro 500 PID
Free Shipping is available for a limited time for this item to most areas in Australia (some freight charge may apply for remote areas - but we'll contact you prior to dispatch if this is the case).
Pickup from our showroom in French's Forest.
Free Australian Metro Delivery
Now with 1.4 BAR steam pressure!
The Profitec Pro 500 espresso machine has everything you need to make cafe quality coffee at home for years to come. It can brew and steam simultaneously and has many components taken straight from commercial machines.
The Pro 500 is built for reliability with no-crush steam and water valves, PID controlled boiler temp, a strong steel chassis and an absolute minimum of plastic inside and out.
It is also easy to live with. The large cup warmer tray has a stainless steel surround which doubles as a handle to allow easy access to the large internal water tank. The drip tray is deep and wide to allow infrequent emptying. The cool touch water and steam wands are easy to adjust.
The latest version of the Pro 500 with PID now has best in class steam pressure. Most heat exchangers with have steam pressure of 1 BAR. The Pro 500 PID now has 1.4BAR steam pressure! This makes milk texturing to a silky consistency a breeze.
- Heat exchanger system
- E61 brew group
- No-wear rotary valves
- High-end 'No-burn' steam and hot water wands
- Boiler and pump pressure gauges
- 2.1 boiler
- 1400W Heating element
- Ulka EX5 vibration pump
- Water tank with adapter and 3L volume
- Sensor shuts off machine when low water volume
- Orange control lamp indicates low water
- Removable cup tray
- Weight 23.5kg (51.7lbs.)
- Dimensions: W x 30.2cm, D x 44.7cm, H x 39.3cm - without porta filter
- W x 30.2cm, D x 55.5cm, H x 39.3cm - with porta filter
- Voltage: 220V - 240V
In the box:
- 1 Porta filter for one cup
- 1 Porta filter for two cups
- 1 1-cup filter 7g
- 1 2-cup filter 14g
- 1 Blind filter
- 1 Tamper see here
- 1 Cleaning brush
- 1 Instruction manual
What size tamper will I need for this machine?
The nominal tamper size for this machine is 58mm, however you will get the best fit in your machine's basket by purchasing a 58.35mm PreciseFit tamper.
|Nominal tamper size||58mm|
|Ideal tamper size||58.35mm|
Top shelf machineBy: Steve on 10 August 2019I bought this machine from JetBlack about 6 years ago now when it first came onto the market. In those 6 years, I can say that it has paid me back many times over. It has not missed a beat during that time and JetBlack are always co-operative and informative. The heat exchanger works perfectly, there is never an issue with temperature control - it's consistent across the board - mine came without the PID - the steam wand is a beast, very quick (just make sure use a good thermometer when steaming). Apart from the occasional normal service, it's been sitting on our benchtop, pushing out the best coffee in town (for friends, neighbours and blow-ins) non stop during that time. It's a 10/10 machine. JetBlack know their products and I would buy one if I needed one, in a second.
Profitec Pro 500 PIDBy: Adam on 16 November 2018The build quality and incredible brewing performance of the Profitec Pro 500, makes an excellent cup of coffee every time. Easy to operate. I would recommend this product.
Profitec Pro 500By: Tim on 1 April 2017Freight to Perth: Level = Expert. The machine comes in a very strong box packed with protection and fitted to a small pallet. This is my third purchase from Jetblack (Lelit PL41TEMD, Mazzer Mini/m, Profitec 500) freight and customer service has been excellent each time. After months of debating differences in the $2000-$3000 machine category I took Jetblack's advice and bought the Profitec Pro 500. I've used the machine daily for 3 months now and can't find one thing to fault! It looks stunning, all toggles and fittings feel very solid and reliable, functionally it performs as advertised in every way. Even with a renown quality it has exceeded expectation.
Fantastic ProductBy: Michael on 13 May 2016I upgraded to the Profitech Pro 500 coupled with the Compak K3 Touch advanced from a Sunbeam Cafe Series EM7000 and there is a huge improvement in both build, and shot quality. The finish of the machine is well refined and it has made an aesthetically pleasing addition to our kitchen. I highly recommend both of these products to anyone looking for an upgrade.