Free Australian Delivery to most locations

The Pro 600 is a dual boiler espresso machine with a PID display. Both boiler temperatures can be individually adjusted using the PID. The high quality stainless steel housing with colored side elements and the striking shaped steam and hot water wands give the Pro 600 a particularly extravagant look.

Must Have: 

The E61 Flow Control Device allows you to adjust the flow of water in your brew group to manually profile your extractions. This custom component is a stainless steel needle valve, which allows the user to vary the amount of water flowing through the group. Variable flow control allows for lengthy pre-infusion for more even saturation and extraction of your espresso. 

Similar to Profitec's existing mushroom, the flow control device is made from stainless steel to resist corrosion. The resulting changes in pressure are reflected by an included gauge which installs on the front of the group. The E61 Flow Control Device can be installed on any Profitec Espresso machine with an E61 brew group.

Included:

• 1 Porta filter for one cup
• 1 Porta filter for two cups
• 1 1-cup filter
• 1 2-cup filter
• 1 Blind filter
• 1 Cleaning brush
• 1 User manual
• Metal Tamper

Specifications:

• Dual boiler (single boiler option)
• E61 brew group with stainless steel bell
• PID-display for the individual temperature adjustment of both boilers
• PID-display indicates the brewing time in seconds
• Manually adjustable brewing pressure
• Programmable ECO-Mode
• Brew group cleaning reminder
• Wear-free rotary valves
• Vibration pump
• 2.8 l water tank
• Automatic shut-off when machine reaches low water volume
• 0.75 l stainless steel coffee Boiler
• 1.0 l stainless steel steam and hot water boiler
• Boiler insulation
• Boiler and pump pressure gauges
• Removeable cup tray
• Weight 24 kg / 53 lb
• Dimensions W x D x H:
• 305 x 450 x 395 mm without portafilter
• 305 x 555 x 395 mm with portafilter

*Please Note: If selecting the E61 Flow Rate Regulator option, please allow for a 2-3 day delay on dispatch as this part must be fitted by our workshop technicians.

What size tamper will I need for this machine?

The nominal tamper size for this machine is 58mm, however you will get the best fit in your machine's basket by purchasing a 58.55mm PreciseFit tamper.

Country of origin

Germany